EISHIN KAGAKU Visble dye penetrant inspection matericals RED MARK
● SOLVENT REMOVABLE TYPE
REGULAR TYPE |
Penetrant |
R-1A(NT) |
Developer |
R-1S(NT) |
Remover |
R-1M(NT) |
AMS/MIL APPROVAL TYPE
In accordance with AMS2644,MIL-I-15135 |
Penetrant |
R-1A(NT)/1 |
Developer |
R-1S(NT)/1 |
Remover |
R-1M(NT)/1 |
LOW HALOGEN/SULFUR TYPE
Compatible with stainless steel,Ni,Ti,alloys |
Penetrant |
R-1A(NT)Special |
Developer |
R-1S(NT)Special |
Remover |
R-1M(NT)Special |
NON-FLAMMABLE TYPE
(HFC is used) |
Penetrant |
RN-1A |
Developer |
RN-1S |
Remover |
RN-1M |
HIGH TEMPERATURE TYPE
Used for hot surface(90-200) |
Penetrant |
R-1AH(NT) |
Developer |
R-1SH(NT) |
Remover |
R-1MH(NT) |
● WATER WASHABLE PENETRANT
REGULAR TYPE |
R-3B(NT) |
Used for casting, key groove, and screw parts. |
LOW HALOGEN/SULFUR TYPE |
R-3B(NT)Special PLUS |
Used for welding bead on stainless steel and Ti-alloys. |
WATER BASE TYPE |
R-3B(NT)-1 PLUS |
Used for raw materials like slab.Non-flammable. |
● SPECIAL DEVELOPER
EASY REMOVABLE TYPE |
R-1SB |
Used at high humidity, low temperature.
Low halogen/sulfur. |
FAST DRYING TYPE |
R-1SD(NT) |
Used at high humidity, low temperature.
Low halogen/sulfur. |
R-1SD(NT)Special |
WATER SUSPENDABLE TYPE |
R-3W |
Developer particles should be suspended in water.
Non-flammable. |
PASTE TYPE |
DP-1S |
Applied with sprayer. High viscosity, non-flammable. |
● SPECIAL REMOVER
SLOW DRYING TYPE |
R-1MS(NT) |
Volatilization speed is slow.
Low halogen/sulfur. |
R-1MS(NT) Special |
WATER AEROSOL TYPE |
R-3M(NT) |
Pure water is filled into aerosol.
Low halogen/sulfur. |
R-3M(NT) Special |
Container
Aerosol type : a set of six cans (one penetrant, two developers, and three removers)
Can size : 3.8L, 18 L
|
